Ventureshield Paint Protection film

Racing Cars / Bikes

Showtrax International is the sole distributor for VentureShield Paint Protection Film within the Motor Racing Industry. At the forefront of racing, Showtrax already supplies dozens of teams from Britain and

elsewhere with either templated car and bike kits or rolls of film for self application.

This product is considerably stronger than any of its competition. Unlike other paint protection films, it does not have a coating and the strength is throughout the film rather than just on the surface. Because of this, VentureShield does not split or develop an ‘orange peel’ effect when stretched around the bodywork. It has immense ability to resist small stones and other debris, so protecting the vehicle bodywork from ‘scuffing’ and paint damage.

VentureShield is virtually invisible and can be applied under or over decals.

On Carbon Fibre bodywork, the film also acts as a guard against impact damage. The film holds the

bodywork together and does not allow shards of carbon fibre to cross onto the track. The majority of the current A1 Grand Prix cars are fully fitted with VentureShield. The results are plain to see.

As more and more race teams see the huge advantages this product has over conventional ‘helicopter tape’ in both strength and price, the more templates we are

producing to ensure that a proper kit is made available. To date, the following racecar's have been templated:

• A1 Grand Prix - Aston Martin DB9

• GP2 - Ferrari (various models)

• Formula 3 - Porsche (various models)

• Formula Renault - Corvette

• Formula BMW - Zonda Pagani

• Challenge Initiave

Many other cars such as LMP1 and LMP2 cars are all installed by our own specialists or with training, by the teams themselves.

A number of Formula 1 cars use VentureShield on leading edges, however extensive tests are now being carried out to assess whether greater use of the film will make the F1 even safer.

Away from the track, we have templates for most

road cars and are installers around the country are on hand to fit the paint protective film to virtually every make of car.

Specifications

Substrate Thickness 6.0 mils (0.006")

Adhesive Thickness 2.0 mils (0.002")

Peel Adhesion (PSTC-1) 25 oz / inch width

Shear adhesion (PSTC-7) Indefinite @ 2.2 psi / 15.2 kPa

Tensile (PSTC-31) 25 mm width / 506 N (31 kg)

Elongation at Break 370% 410%

Puncture Resistance (ASTM D - 1000) 18 kg 36 kg

Release Liner Polycoated Bleached Kraft 148gsm per ream

Maximum Temperature Continuous Use 212 °F / 100 °C

Minimum Application Temperature –10 °F / – 23 °C

Chemical Resistance Excellent

UV Resistance 100% up to 10 Years.